Whether you are using the Plantaform Indoor Garden offline or just do not have your smartphone with you, you can still interact with the device. See below for a Button Control Chart using the status light button:
Note: After 15 seconds without input, the device will go back to its initial state if you haven’t made a final selection.
Quick Actions with Status Button:
- Single click to dim lights until the next day or restore optimal brightness.
- Double click to activate the fog and lights for a show!
Start Growing your Plants:
- Press and hold the status button for 3 seconds
- The status light should now pulse GREEN
- Press and hold the button for 3 seconds to start your Pod Pack selection, the light will now be solid GREEN
- Click the button to cycle through the Pod Packs available:
- Leafy greens (status light solid GREEN)
- Flowers (status light solid MAGENTA)
- Herbs (status light solid BLUE)
- Press and hold the button for 3 seconds again to make a selection. The light will flash with the selected Pod Pack colour and you will hear audible confirmation feedback for a few seconds
- Rejuvenate has started growing your plant selection
Cleaning Mode:
- Press and hold the button for 3 seconds
- The status light should now pulse GREEN
- Click the button to cycle through the options until it pulses WHITE
- Hold the button for 3 seconds for Clean Cycle selection
- Click the button to cycle through the cleaning options:
- Press the button once for 30 minutes cleaning process (solid BLUE)
- Press the button once for 1 hour cleaning process (solid ORANGE)
- Continue to follow the cleaning instructions found within the user manual
Draining the Top Water Tank:
- Press and hold the button for 3 seconds.
- The status light should now pulse GREEN
- Click the button to cycle through the options until it pulses YELLOW
- Press and hold the button for 3 seconds to make selection. The light will turn solid YELLOW, you will hear audible confirmation feedback for a few seconds
- The top tank drains completely after 15 minutes
Connecting the Indoor Garden to the Internet:
- Press and hold the button for 10 seconds until the status light pulses BLUE
- Download and open the Plantaform App on your phone
- Tap 'Add New Device'
- Follow the instructions on your phone
- The Indoor Garden is connected to the internet when the status light changes to solid WHITE
Comments
0 comments
Please sign in to leave a comment.