The Status Button Light on your Plantaform Indoor Garden serves as an important indicator, providing real-time updates on your device’s operation, connectivity, and maintenance needs. Below is a detailed breakdown of what each light colour means and the corresponding actions you may need to take.

Solid White ⚪️ (Device Is Online)

This indicates your Plantaform Indoor Garden is functioning as expected, and everything is running smoothly and online connected to WiFi.

• No action is required.

Blinking White ⚪️ (Device Is Connecting To WiFi)

This indicates your Plantaform Indoor Garden is currently finalizing the connection to your WiFi network.

Solid Green 🟢 (Device Is Offline)

Your Plantaform Indoor Garden has temporarily lost connection to Wi-Fi but is trying to re-establish the connection automatically.

• If the green light continues for an extended period:
  • Ensure your Wi-Fi network is active and stable.
  • Try moving the device closer to your Wi-Fi router if the connection is weak.
  • If the issue persists, try to Reconfigure the device with the following steps:

Blinking Blue 🔵 (Wi-Fi Setup Mode)

The device is in Wi-Fi pairing mode and ready to connect to the Plantaform App.

• If you’re setting up your device for the first time, follow these steps:
  • Open the Plantaform App and navigate to device setup.
  • Follow the on-screen instructions to connect your garden to your Wi-Fi network.
  • Once connected, the light should turn Solid White, indicating a successful connection.

• If you're trying to reconfigure your device, follow these steps:

  • Unplug your Plantaform device and plug it back in.

  • Press and hold the status light button for 10-15 seconds until the light starts flashing blue.

  • Open the Plantaform App on your smartphone.

  • Navigate to the Home Page (where you see options like Lights, Water, and Plant Care).

  • Tap the (i) icon in the top right corner.

  • Tap the three-circle button in the top right corner again.

  • Select “Reconfigure” and follow the on-screen prompts to reconnect your device to WiFi.

Blinking Yellow 🟡 (Top Water Tank Draining Into Bottom Water Tank)

This blinking yellow light indicates that the top water tank of your Plantaform Indoor Garden is actively draining into the bottom tank. This automatic feature helps maintain optimal water levels for efficient plant growth.

• To manually activate this feature, please follow these steps:

  • Ensure the bottom water tank has no more than 5L of water to avoid overfilling, which could affect the operation of the foggers.

  • Press and hold the status light button for 3 seconds; the status light will pulse green.

  • Click the button to cycle through the options until it pulses yellow.

  • Press and hold the button for 3 seconds to select this option; the light will turn solid yellow and you will hear an audible confirmation for a few seconds.

  • The top tank will completely drain after 15 minutes.

Solid Yellow 🟡 (Bottom Water Tank Is Low)

This solid yellow light indicates that the bottom water tank of your Plantaform Indoor Garden is low on water. It’s a reminder to refill the tank to ensure your plants continue to receive adequate hydration for optimal growth.

• To refill the bottom water tank, please follow these steps:

  • Check Water Level: Verify that the bottom tank is indeed empty by visually inspecting the water level.
  • Use the App: Launch the Plantaform App and navigate to the ‘Water’ page.
  • Input Remaining Water: If there’s any residual water, enter the amount left in the bottom tank into the refill calculator.
  • Add Water and Nutrients: Follow the app’s instructions to add the recommended amount of water and nutrients to the bottom tank. Ensure not to overfill.
  • Confirm Refill: Once you’ve added the necessary water and nutrients, tap the “I’ve refilled the tank” button on the app to update the system.
  • Status Light Reset: After refilling, the status light should return to solid white, indicating the system is back to normal operation.

Solid & Blinking Red 🔴 (Bottom Water Tank Is Empty & Needs To Be Refilled)

This solid or flashing red light signals that the bottom water tank of your Plantaform Indoor Garden is empty, which requires immediate action to ensure your plants do not suffer from lack of water.

• To refill the bottom water tank, please follow these steps:
  • Check Water Level: Verify that the bottom tank is indeed empty by visually inspecting the water level.
  • Use the App: Launch the Plantaform App and navigate to the ‘Water’ page.
  • Input Remaining Water: If there’s any residual water, enter the amount left in the bottom tank into the refill calculator.
  • Add Water and Nutrients: Follow the app’s instructions to add the recommended amount of water and nutrients to the bottom tank. Ensure not to overfill.
  • Confirm Refill: Once you’ve added the necessary water and nutrients, tap the “I’ve refilled the tank” button on the app to update the system.
  • Status Light Reset: After refilling, the status light should return to solid white, indicating the system is back to normal operation.