Replacing the fog fan in your Plantaform Indoor Garden is a straightforward process that you can complete with just a few tools. Below are the summarized steps from our detailed video tutorial, which you can watch for a visual guide: Fog Fan Replacement Tutorial.

Summarized Step-by-Step Guide to Replace the Fog Fan:

1. Perform Electrical Test: Start by performing an electrical test of the device.
2. Remove Interior Screws: Unscrew the 8 screws from the interior of the top lid.
3. Disconnect Power Cable: Safely disconnect the power cable before proceeding.
4. Remove Top Lid: Lift off the top lid to expose the interior components.
5. Locate and Remove Faulty Fog Fan: Identify the faulty fan and remove the 2 securing screws.
6. Disconnect Fog Fan Cable: Unplug the fog fan cable from the PCB board.
7. Install New Fog Fan: Place the new fog fan in the same position as the old one.
8. Secure the New Fog Fan: Screw in the 2 screws to secure the new fan.
9. Reconnect Fog Fan Cable: Attach the fog fan cable to the PCB board.
10. Check Top Lid Gasket: Make sure the gasket on the top lid is properly aligned.
11. Tuck In Fog Fan Cable: Ensure the fog fan cable is neatly tucked in.
12. Reassemble and Test: Place back the top lid, screw it back in place, and plug in the device.
13. Perform Another Electrical Test: Test the new installation by plugging back in the device.
14. Engage Party Mode: Double-click the status light button to activate party mode and ensure the fan is working correctly.

These steps will guide you through replacing the fog fan to ensure your Indoor Garden continues to function optimally. If you encounter any difficulties or have further questions, don’t hesitate to reach out to our support team for assistance.